Anti-tab #6

I drew the control horn and machined it at work on Friday.  When I got home, I used my drill press like a hillbilly pin router and cut the pockets in the anti-tab ribs to fit the control horn.  I glued the two ribs to the control horn on Saturday.

Number of hours: 1.2
Total hours: 253.1

Anti-tab #5

I started tonight by cleaning up some excess glue on the anti-tab assembly.  Next, I hauled my drill press inside, as it is too cold to work in the garage, and drilled mounting holes in three sections of hinges.  After drilling the hinges, I drilled holes in the anti-tab spar to mount the hinges.  Next, I mounted nut plates on the anti-tab spar.  I finished up the night by clearancing the foam ribs of the anti-tab assembly for the nut plates.

Number of hours: 1.5
Total hours: 251.9

Anti-tab #4

I glued another rib on the anti-tab on Saturday and another one last night.

Number of hours: 0.4
Total hours: 250.4